Carbon White Film
- The carbon film has a carbon fiber-like texture.
- Flex carbon white film is designed for use on cotton, polyester, and viscose fabrics.
- The selected design is very easy to apply using a regular iron.
- Flex foil with a carbon pattern offers excellent flexibility and very good adhesion.
- It should be washed by hand or on a "delicate" cycle at temperatures up to 40°C.
- Ironing: only on the reverse side.
Advantages of Carbon Flex Film:
- Carbon Flex Film film is perfect for decorating clothing and textiles such as table runners, placemats, curtains.
- Flex film has a wide range of applications for embellishing items like caps, and socks.
- Heat transfer film can also be successfully used in art and craft projects.
- Using heat transfer film, you can easily apply a company logo, advertising slogan, or promotional message to a product.
- Designs made with Flex film have a modern look and works great as an advertising medium.
- Carbon flex foil is used as a medium for advertising purposes.
Heat Pressing Parameters:
- Cutting angle: 45°
- Pressing time: 8–12 seconds
- Pressing temperature: 140–150°C
- Press pressure: medium
- Carrier removal: hot peel
Application Instructions for Flex carbon with the use of an iron:
- Pre-iron the area where the design will be applied to remove any wrinkles or moisture.
- Place the cut-out design on the right (outer) side of the fabric.
- Make sure the iron is well-heated and the steam function is turned off.
- Press the iron onto the design for about 10 seconds without moving it horizontally to avoid distorting the pattern.
- Gently peel off the transfer film. Check if the design is properly adhered. If not, repeat the heat application process.
Heat Pressing Parameters:
- Cutting angle: 45°
- Pressing time: 8–12 seconds
- Pressing temperature: 140–150°C
- Press pressure: medium
- Carrier removal: hot peel
Application Instructions for Flex carbon withy the use of an iron:
- Pre-iron the area where the design will be applied to remove any wrinkles or moisture.
- Place the cut-out design on the right (outer) side of the fabric.
- Make sure the iron is well-heated and the steam function is turned off.
- Press the iron onto the design for about 10 seconds without moving it horizontally to avoid distorting the pattern.
- Gently peel off the transfer film. Check if the design is properly adhered. If not, repeat the heat application process.