Red, metallic flex foil with glossy or satin finish

• thin thermal transfer flex foil with a metalized, glossy finish
• the foil remains shiny after heating, but may satin or even matte finish - just iron on the foil several times, the effect depends on the quantity of repeated ironings - to maintain a shiny finish, do not repeat the heating
• metallic flex films with adhesive backing (the glue is activated of the heat transfer press)
• flex films with glossy or satin finish are flexible and stretchy - very good adhesion
• metallic flex with gloss (flex mirror) for thermal transfer is suitable for welding to many types of textiles: cotton, polyester and viscose
• due to its full coverage, the flex film can be applied to fabrics of various colors, both light and dark
• metallized flex foil with satin finish is resistant to scratches and creases
• satin flex film works well when cutting on a plotter and selecting unnecessary elements
• heat transfer vinyl (HTV) can be used with other foils (max. 3 layers) on clothes (T-shirts, sweatshirts, caps, workwear and sportswear) and bags
• T-shirts and other elements marked with metallic flex foil should be hand washing, inside out after 12 hours, at 40^o C, avoiding strong detergents
• do not dry clean, do not tumble dry
• ironing inside out
• see more flex foils in other vivid colors

Application instruction:

1. cut the image/project on the plotter in a mirror image
2. use a blade 45°
3. weed the excess material
4. iron on a T-shirt or other item of clothing to evaporate the moisture from the material
5. place the design on the textile heat it for 8-12 seconds at 140-150°C with medium press pressure
6. remove the transparent warm liner (after 5-7 seconds opening the press)
7. if you want the foil to have a shiny finish, do not iron it again
8. if you want a satin or even matte finish, repeat the ironing of the design as many times until you achieve the desired end result

Flex films are a very popular material used in thermal transfer. Flex heat-sealable foils are cut on a cutting plotter and then applied to the selected base using a heat transfer press. Depending on the properties of the film and the final effect, there are a lot of types heat transfer vinyls: from standard, metallic, glitter, lacquered, neon, reflective, structured and others. At your request, we can provide you a flex or flock foil sample - please ask your sales representative for details.
See also ONLINE TEMPLATE