White-opaque transfer paper for printing onto dark colored textiles (100% cotton), leather and denim etc.FOREVER Laser-Dark is suitable for the new generation of color copiers and color laser printers with a higher fusing temperature as well as for machines with silicone oil fusing! To make printout the silicone paper is also necessary
Antistick. To achieve a matt screen look, press the garment with a sheet of Matte Finish.
Application instructions: - First pay attention to the printer settings for the media type "thick" or "cardboard"
- Print the selected theme legibly (without the mirror effect); insert the sheet into the manual feed tray - the print occurs on the white side without the manufacturer's markings
- Cut off empty, unprinted fields on the printout,
- Place the material you want to mark on the press - make sure it is free of dirt and iron it in the press for a few seconds to remove moisture
- Remove the base paper, then place the paper face up on the finished surface (right side to side)
- Cover the whole motif with silicon support paper AntiStick , and put a few sheets of plain photocopier paper on it
- Heat the pattern for the material at 200 o C in 80 seconds and under high pressure from the press
- Wait for the material to cool completely, then smoothly remove photocopier paper and Anti Stick paper
- After removing the paper, you can gently stretch the print in all directions to give it flexibility
- The resulting print is slightly shiny - you can matte it with support paper Matt Finish for about 10 seconds in 200 o C; also remove cold backup paper
- Note: Fabric printed with Laser Dark can be washed in cool water using a mild detergent. Do not bleach. Do not iron the printed field