Multi-Trans PRO

Multi-Trans Pro is specifically for rough surfaces such as wood, paper, cork and other similar substrates.

• Transfer paper for laser printers to transfer to hard substrates with a rough surface
• Weight: 140 g/m²
• Low Temperatures: 110-150°C/230-302°F
• Very short pressing times of 1-15 seconds
• Hot/Warm Peel
• Paper without background

• Multi-Trans PRO is perfect when it comes to complex personalization on rough surfaces like wood, paper, cardboard, cork and much more
• With the shortest pressing times and low temperatures, you can peel Multi-Trans PRO smoothly from your substrate while hot, making it the best performing product on the market
• Perfect to produce a variety of substrates for wedding decoration, merch, packaging for other heat sensitive materials
• The transfer paper is compatible with most laser printers and copiers available on the market – in the CMYK palette (for white and light-colored materials) as well as CMYW with white toner (for both light and dark materials)
• Paper for heattransfer is suitable for all hard, light surfaces: paper and paper bags or napkins, wood and wooden products, card, metal, mirror, glass, leather, cork and coasters, book covers, mugs, plastic (PP) tumblers and others
• Multi-Trans transfer paper for lasers printer is recommended for printing any graphics and photos - even with small details, white elements and tonal transitions, on items such as: mugs, plates, beer glasses, mats, plates, pens, plates CD
• Thermal transfer paper for prints on wood, metal, cups or puzzles guarantees excellent image resolution and saturated colors
• Paper for cups, metals and wood allows for easy marking and production of gadgets: all you need is a laser printer, the selected base and heat press
• You will need a special silicone pad , which ensures perfect adhesion of the transfer paper to the substrate

See/Downoload Print settings table for selected printer models

1. Pre-press your substrate/product with the recommended silicone pad and settings from the table below.
2. Place your design on your substrate/product (printed-side facing down) and if necessary,fix it with heat-resistant tape.
3. Press your transfer with the parameters indicated below and cover it with the recommededsilicone pad in the table below.
4. Peel the transfer paper by using the recommended settings from the table below.

See/Downoload Table of welding parameter settings for selected media

5. ATTENTION: At this point, the substrate is very hot. Take precautions while handling it.
6. If indicated in the table, re-press your substrate/product with the same temperature as in step 3 for about 2-5 sec.

• Remove any dust, coatings, chemicals and greases from substrate/product-surfaces, prior to the transfer. Metal and glass surfaces can be cleaned with alcohol.
• Using the Silicone Pad helps distribute the heat evenly across the transfer.
  ATTENTION: The pressing parameters can vary when using a silicone pad.
• If you excess particles have been transferred, you can easily remove them by rubbing it with a cloth.