ORATAPE MT95 - transparent self-adhesive transfer foil for cutting plotters
- The carrier has a medium-tack glue - modified polyacrylate
- The mounting foil is used to carry graphics cut on the plotter
- The transport foil is made of polyethylene
- The foil has a high tensile strength, thanks to which it is possible to precisely place the graphics on the target substrate
- The foil is suitable for carrying patterns cut from most of the available types of foil, both matte and glossy
- It is possible to peel off the transport film from the self-adhesive foil without any residues in the period of more than 6 months from the moment of sticking
- Thickness (foil + adhesive layer): approx. 155 microns
- Weight (foil with glue): 110g / m2
- Adhesive strength (FINAT- test method I, after 20 minutes, steel): 2N / 25mm
- Tensile strength (DIN EN ISO 527) dry:
- longitudinal: min. 25MPa
- transverse: min. 25MPa
- Tear resistance (DIN EN ISO 527)
- longitudinal: min. 500%
- cross: min 700%
- Recommended application temperature: above + 20°C
- Shelf life (in original packaging, at 20°C and 50% relative air humidity): 2 years
Attention!
Before sticking the foil to the surface, it should be cleaned of dust, grease and other contaminants. Freshly varnished or painted surfaces should dry for a minimum of 3 weeks. The applicability of selected varnishes or paints with self-adhesive foil should be checked before the final application of the foil. Before sticking the foil, check whether there are any chemical reactions between the foil and the substrate.
See also other types of
application tapes