• Permanent heat-seal thermofilm type I enables the ironing of various types of patches. It is easy to apply, you don't need to sew them into the substrate
• The film for sticking the emblems consists of 100% copolyamide
• Dimension: 75 cm x 100 m
• Thickness: 73 µ
• Weight: 80g/m2
• The thermal foil for gluing the application evenly covers the entire surface of the tag, including the edges (no protruding edges)
• Thermal film for patches is widely used, e.g. for caps, jackets with lining, uniforms, pants, sleeves, bags, belts of bags, wedding or communion dresses, baptism clothes, potfele, paper gift bags, bedding, ironing of curtains, etc.
• Clothes with patches can be washed at max. 95^oC
• Film for ironing on patches is adapted for use with heat transfer presses

Usage:

• Carefully cut out the shape of the foil that matches the attached tag, the foil musn't protrude beyond the edges
• Heat with an iron of temp. 170 degrees for 5 sec. It can be ironed through the name tag or through the securing paper (remove the paper after heating)
• Put the sticker in a selected place (film face to the substrate)
• Using an iron at 170 degrees stick for about 15 seconds pressing the tip of the iron
• Note: Full resistance to tearing and washing textile gluing foil is obtained after 48 hours from the moment of sticking