DESCRIPTION
With this transfer paper everybody can enjoy
creating their own T-shirt designs. Printing your
favourite image and ironing it onto a T-shirt or
any cotton textile is a simple job that everybody
can do.
The paper is designed for use in inkjet printers. Paper dedicated to make a thermo-printing on dark and black cotton textilies. The thermo-print can be made with regular iron and heat-resistant paper.
INSTRUCTION
PRINTING:
- Print the selected graphic in right-readable on the coated side of the paper.
NOTICE: Put one piece of paper into printer at the same time!
- Use the "normal paper mode" and "high resolution" settings in printer.
NOTICE: Reduce the dosing the ink level to about 10-15%, If appear stains.
- Leave the paper to dry for 5-10 minutes.
- Cut the printed motif with a margin of 1-3 mm.
- Peel printed film of base paper.
TIP: test print to check the property of the settings
HEAT TRANSFER:
- Prepare a stable and heat-resistant ironing surface.
- Heat the iron to the maximum temperature for 5-10 minute. The recommended temperature is 200°C.
NOTICE: Do not use a travel iron!
- Iron the cotton textilie in order to completely smooth.
- On the textile place the film with printed side to up.
NOT IRON DIRECTLY ON THE FILM!
- Iron the whole surface through heat-resistant paper in order to get matte thermo-printing.
- Iron the whole surface through silicone paper in order to get glossy thermo-printing.
- Make ironing by 4 minutes for A4 without skipping the edges. Smaller prints need shorten time (1/4 A4 need 1 minutes)
- Wait 1 minute and remove heat-resistant or silicone paper.
- Heat-resistant or silicone paper can be used as long as it is clean.
WASHING:
- Clothing with thermo-printing should be washed before the first clothing.
- Wait a minimum of 24 hours before the first wash.
- Wash on the left side at 40°C temperature with mild detergents.
- Do not bleach!
- Do not dry!
- Iron on the left side.