Thermal transfer decal paper for laser printers
- Size: A4 format (21 x 29.7 cm)
- Weight: 130 gsm2
- Quantity: 10 sheets
Papier transferowy typu kalkomania Forever Waterslide
- Waterslide HT paper is dedicated for transfer to hard substrates in various colors, sensitive to temperature (e.g. candles, glass)
- Water decal papers are applied cold
- Each sheet consists of two layers: a paper base and foil on which the print is placed
- The transfer paper is suitable for printing in most laser printers and copiers available on the market in the CMYK palette (NOTE! The paper is also suitable for printing in CMYW printers with white toner, but then the application instructions differ from those presented below)
- Waterslide HT laser transfer paper is recommended for printing even with small details (e.g. letters)
- Thermal transfer papers enable easy marking and production of gadgets and decorations: all you need is a laser printer and the selected primer
Application instructions:
- First, pay attention to the printer settings for the media type "Labels"
- Print the selected motif on the glossy side of the sheet legibly (without the mirror image effect)
- If there are blank, unprinted portions on the printout, cut them off as accurately as possible
- Place the printed paper in lukewarm water for about 1 minute until it is well soaked and curled up
- Carefully separate the preprinted film from the base paper
- Place the foil on the selected base and remove water and air bubbles from underneath it
- Gently dry the whole thing with a soft cloth and let it dry for about 3 hours
- Tip: If you are transferring to heat-resistant materials (e.g. porcelain), you can additionally fix the sticker by burning the whole thing in an oven at 180oC in in 10 minutes
Full instructions, step by step can be seen in the video: